Low Volatile, Remains Flexible
Pressure Resistant, Resists Cracking And Shrinking, Makes Leak-Proof Gaskets In Seconds
NOTES:
• Flexible and stable at all temperatures from -76℉ to 500℉ (-60℃ to 304℃).
• Not recommended for continuous immersion in gasoline.
• Do not use instant gasket only when replacing cylinder head gaskets with pre-determined tolerances.
DIRECTIONS:
1. Clean and dry surfaces, completely remove all dirt & grease.
2. Remove cap, puncture inner seal, and screw on nozzle cut at designed bead size.
3. Apply even beads (1/16"-1/8") around perireter or one surface.
4. Assemble parts once silicone skins over.
5. Remove excess silicone with knife.
6. Do not squeeze silicone out by overtightening bolts.
7. Clean nozzle and replace cap tightly afteruse. Sealant may cure in nozzle. lf this occurs, remove cured plug with a pin or paper clip.
